At Pull Out Testing, we specialise in determining the holding strength of anchors, bolts, and fixings by applying controlled tension until the fixture either meets or fails the required load. 

A calibrated hydraulic pull tester is attached to the fixing, which is then subjected to increasing load forces to assess its capacity.

Because accurate results are essential for compliance and safety, pull out testing in Mountsorrel LE12 7 must be carried out using calibrated equipment by trained professionals. 

Contact Pull Out Testing today to arrange professional testing or to request a free quote.

How Much Does Pull Out Testing in Mountsorrel Cost?

Pull out testing in Mountsorrel costs £200–£300 for a site visit, plus £20–£50 per fixing tested.

Larger volumes of tests, such as for scaffolding or large-scale installations, may be quoted at a discounted rate per unit.

Specialised or difficult-to-access locations may require additional time or equipment, influencing the final cost.

The price depends on volume, fixing type, and site conditions. 

Get a quote today for pull out testing in Leicestershire by contacting our team today using the enquiry form.

What Are the Benefits of Pull Out Testing?

Pull out testing provides reliable data on fixing strength, ensuring installations are safe, compliant, and fit for purpose. 

The main advantages of construction testing in Mountsorrel include:

• Certified results – Testing provides verifiable documentation to meet safety regulations and project specifications.
• Increased safety – Identifies weak or underperforming fixings before they pose a risk, preventing structural failures.
• On-site verification – Tests are performed in real conditions, ensuring the actual performance of fixings in place.
• Compliance with UK standards – Supports compliance with BS 8539 and other relevant regulations for anchoring and fixings.
• Versatile application – Suitable for concrete, brick, blockwork, and steel, across a range of industries.
• Fast and efficient – Minimal disruption during testing, with prompt reporting for project continuity.
• Cost-effective risk management – Avoids costly rework or failures by identifying issues early in the process.

When is Pull Out Testing Required?

It is essential during scaffold installation, steel framework anchoring, façade system mounting, and mechanical or HVAC installations.

Pull out testing in Mountsorrel is required when installing or verifying load-bearing fixings in structural applications.

Testing may be mandated by building control authorities, health and safety officers, or insurers to confirm that anchors and fixings meet design load requirements. 

It is also used during routine maintenance, refurbishment, or when fixings are exposed to potential corrosion or fatigue.

Because site conditions and material variability can affect fixing performance, on-site testing ensures that each anchor performs to specification in its actual setting.

What Fixings Can Be Tested?

We test resin anchors, through bolts, expansion bolts, drop-in anchors, sleeve anchors, and mechanical fixings. 

Testing can be performed on fixings embedded in concrete, masonry, block work, and steel.

Each fixing type may require a specific testing setup, and our technicians ensure that all tests are carried out in accordance with best practice and manufacturer guidelines.

How Long Does Pull Out Testing Take?

A standard pull out test takes 10 to 20 minutes per fixing.

This includes setup and measurement. 

The overall duration of a project depends on the number of fixings to be tested, site access, and whether tests are proof load (pass/fail) or ultimate load (failure-based).

Small-scale testing projects in Mountsorrel can often be completed within a half-day site visit, while larger-scale testing may take one or more full days. 

We provide clear timelines upon quote confirmation, ensuring minimal disruption to your schedule.

What is the Difference Between Proof Load and Ultimate Load Testing?

Proof load testing is used for compliance and certification, while ultimate load testing is reserved for sample testing or when assessing the limits of a new fixing system.

Proof load testing applies a predetermined load to a fixing to verify that it can safely carry the expected working load. 

This test is non-destructive when the fixing holds the load within tolerance. 

Ultimate load testing increases the applied force until the fixing fails, determining the maximum load capacity.

Because both methods yield important safety data, the appropriate test is selected based on the project’s risk profile and compliance requirements.

Are Certificates Provided After Testing?

We provide detailed pull out test certificates for each fixing or test series.

Mountsorrel Pull Out Testing documents the load applied, results achieved, and compliance with relevant standards. 

Certificates include the fixing location, date, equipment calibration details, and technician credentials.

These certificates are accepted by building control officers, site managers, insurers, and safety inspectors.

Why Should I Choose Pull Out Testing?

Pull Out Testing provides certified, accurate, and efficient testing services, ensuring compliance and safety for all project types. 

Our trained technicians use calibrated, industry-standard equipment, delivering fast response times, competitive pricing, and detailed reports. 

Whether for new installations, maintenance, or inspections, we tailor services to your needs, ensuring professional results with minimal disruption.

Is Out-of-Hours Testing Available?

We offer flexible scheduling, including early mornings, evenings, and weekends.

We ensure you meet project deadlines and minimise operational disruption. 

Let us know your availability when requesting a quote, and we will accommodate wherever possible.

Is Pull-Out Testing Legally Required?

Pull-out testing is often legally required under UK construction and health & safety regulations, including BS 8539 (Fasteners), EN 795 (Anchors for Fall Protection), and LOLER (Lifting Operations and Lifting Equipment Regulations). 

Any structure involving load-bearing fixings, safety equipment, or facade installations may require certified pull-out testing in Mountsorrel to confirm compliance. 

Since local authorities, insurers, and industry regulators may request proof of testing, regular inspections help avoid fines, project delays, and legal risks.

How Do I Get a Quote for Pull Out Testing?

Contact Mountsorrel Pull Out Testing directly for a free, tailored, and no-obligation quote.

Provide the site location, number of fixings, type of fixings, material details, and any site access or scheduling requirements. 

We respond within 24 hours and arrange site visits promptly.

Contact Pull Out Testing today for certified, professional testing services.

Make sure you contact us today for pull out testing services in East Midlands.

Here are some towns we cover near Mountsorrel LE12 7

Syston, Birstall, Loughborough, Leicester, Leicestershire

For more information on pull off tests in Mountsorrel LE12 7, fill in the contact form below to receive a free quote today.